私の電話Motorola G3(2015)がMarshmallowに更新されているとき、PCに接続されている場合はファイルが表示されません。接続中に、チャリリングのみ、PTP、MTP、MIDIとしてオプションが表示されます。 MTPを選択すると、外部カードが表示されますが、内部メモリが検出され、すべてのファイルが表示されている内容が表示されていません。
私の電話Motorola G3(2015)がMarshmallowに更新されているとき、PCに接続されている場合はファイルが表示されません。接続中に、チャリリングのみ、PTP、MTP、MIDIとしてオプションが表示されます。 MTPを選択すると、外部カードが表示されますが、内部メモリが検出され、すべてのファイルが表示されている内容が表示されていません。
When my phone MOTOROLA G3(2015) is updated to Marshmallow, its not showing files when connected to PC. While connecting, it shows options as charing only, PTP, MTP, MIDI. When I select MTP, it shows the external card, but not showing the contents, where as internal memory is detected and all files are shown.
これは、バグを取り除くのが簡単で簡単です... USBケーブルを取り外し、設定、アプリ、およびShow System Appsに移動して、外部ストレージとメディアストレージを見つけ、それぞれのデータとキャッシュをクリアして再起動してからフル起動後5分後にメディアデータベースを再構築し、USBに接続してMTPを選択します。行くのが良いはずです。
編集:SDカードに多数の(メディア)ファイルが含まれている場合、データベースが再構築されるまでに5分以上かかることがあります。このデータベースの構築のステータスが電話自体で構築されているかどうかを確認する方法はありません。
も、これは単独で十分ではないと述べたことに注意しているが、時にはシステムキャッシュパーティションを拭き取って再構築する必要があることに注意してください。 Motoからこの操作を実行するための公式手順はここ。この操作ではかなりの時間がかかる可能性があります... 5-15分、時折さらに長く、操作を中断しないでください。
This is a well discussed and easy to fix bug... Disconnect USB cable, go to Settings, Apps, and Show System Apps and find External Storage and Media Storage and clear data and cache on each one and reboot, then give it 5 min after full boot up to rebuild media databases and connect to USB and select MTP. Should be good to go.
EDIT: In some instances where the SD card contains a large number of (media) files, it can take more than 5 minutes for the databases to rebuild. There is no way to see if the status of this database buildup in the phone itself, so sometimes you just have to be patient.
Also note that some users have stated that this is not sufficient by itself, but sometimes the system cache partition needs to be wiped and rebuilt. Official instructions for performing this operation from Moto are here. Note that this operation can take significant time... 5-15 minutes, occasionally even longer, do not interrupt the operation.
ドライバを取り付ける約4時間後、データとアンプを拭きます。アプリのキャッシュ、キャッシュパーティションの拭き取りなど...
私は、USBがコンピュータに接続されている間に、USBがコンピュータに接続されている間にUSBオプションを変更するためだけの解決策は、USBオプションを変更してからUSBオプションを変更します。<コード> 99887666544331 < /コード>もう一度Voila!
編集: USBオプションを見つける方法デバイス間で異なる場合があります。 Samsung Galaxyデバイスで、通知バーをタッチしてドラッグし、次に「<<<<
After about 4 hours of installing drivers, wiping data & cache of apps, wiping cache partition, etc...
I found the solution was just to change USB option from 'MTP' to Charging
while USB was connected to the computer, then while still connected, change the USB option back to MTP
once more, voila!
Edit: How to find the USB options may vary between devices. On Samsung Galaxy devices, touch and drag the notification bar down, then tap "Connected as a <whatever-device-type-the-phone-is-currently-connected-as>".
Motorolaからアップデート後、それは機能します..
After an update from motorola, it works..
© 2022 cndgn.com All Rights Reserved. Q&Aハウス 全著作権所有